1. Tools used in the curtain wall: toothless saw blade cutter, hand electric drill, impact electric drill, nail gun, various specifications of drills, wrenches, screwdrivers, hand hammers, ink lines, line hangers, nylon lines, steel tapes, electric welders , Oxygen cutting equipment, driven suction cups, electric hanging baskets, glue guns, pneumatic riveting guns, safety belts, etc.
2. Preparatory work before Aluminum Composite Panel Cladding enter the site. This part of the Alcopan Aluminum Composite Panel work is the initial stage of the project. It is necessary to take the construction service as the principle and complete it on time, with quality and quantity. The details are as follows:
(1) After the contract is signed, the designer must put forward the material use schedule of the project in the shortest time according to the architectural drawing of the project and the plan drawing of the curtain wall project.
(2) The project manager department and the production department cooperate with each other to make a processing plan for this project based on the construction schedule and the actual situation of the project site, rationally organize and arrange production, and ensure that the Alucobond Aluminium Composite Panel products arrive in time.
3. Installation process: Pay-off→Fixed frame connecting parts→Fixed frame→Install aluminum plate→Close structure treatment→Inspection
Four, installation precautions
1. The variety, quality, color, pattern and line of the Golden Acp Sheet plate should meet the design requirements, and there should be a product certificate.
2. When the frame of the curtain wall adopts profiled steel keel, its specifications and shape should meet the design requirements, and should be treated with rust removal and antirust.
3. For Acp Aluminum Composite Panel plate installation, when the design is not required, cored aluminum rivets should be used, and a rubber ring must be inserted in the middle. The distance between blind rivets is controlled within 100-150mm.
(1) Pay-off Fix the skeleton and bounce the position of the skeleton to the base layer. The skeleton is fixed on the main structure, and the quality of the main structure is checked before laying out.
(2) Connecting parts of the fixed frame Weld the connecting parts on the column of the main structure to fix the frame.
(3) Fixed skeleton The skeleton is pre-treated with anti-corrosion treatment. The Dibond Aluminium Composite Panel installation skeleton position is accurate, and the combination is firm. After installation, check the center line, surface elevation, etc. In order to ensure the installation accuracy of the slab, it is advisable to use theodolite to penetrate through the beams and mullions. Properly handle deformation joints, settlement joints, and variable cross-sections to meet the requirements of use.
(4) Install the Acm Aluminium Composite Material plate The installation and fixation of the aluminum plate should be firm and reliable, simple and easy.
1. The gap between the board and the board should be treated internally to make it flat and smooth.
2. After the aluminum plate is installed, cover and protect the parts that are easily contaminated with plastic film or other materials.