2. Preparatory work before Acm Aluminum Composite Material enter the site. This part of the work is the initial stage of the project. It is necessary to take the construction service as the principle and complete it on time, with quality and quantity. The details are as follows:
(1) After the contract is signed, the designer must put forward the material use schedule of the project in the shortest time according to the architectural drawing of the Aluminium Composite Sign project and the plan drawing of the curtain wall project.
(2) The project manager department and the production department cooperate with each other to make a processing plan for this project based on the construction schedule and the actual situation of the project site, rationally organize and arrange production, and ensure that the products arrive in time. 3. Installation process: Set up the scaffolding → pay off → fix the connecting parts of the steel frame → weld the steel frame → install the aluminum plate → close the structure treatment → inspection 4. Installation precautions 1. The variety, quality, color, pattern and line of the aluminum plate should be consistent with 3mm Aluminium Composite Panel Design requirements, and there should be a product certificate.
2. The specifications and shape of the steel frame of the canopy should meet the design requirements, and should be treated with rust removal and rust prevention.
3. For aluminum plate installation, when the design is not required, cored aluminum rivets should be used, and a rubber ring must be inserted in the middle. The distance between blind rivets is controlled within 100-150mm.
(1) Pay-off: Fix the steel skeleton and bounce the position of the skeleton to the base layer. The skeleton is fixed on the main structure, and the quality of the main structure is checked before laying out.
(2) Connecting parts of the fixed frame Weld the connecting parts on the column of the main structure to fix the frame.
(3) Fixing the skeleton After the skeleton is welded, the anti-corrosion treatment is carried out. The installation skeleton position is accurate and the structure is firm. After Alumalite Sheet 4x8 installation, check the center line, surface elevation, etc. In order to ensure the installation accuracy of the slab, it is advisable to use theodolite to penetrate through the beams and mullions. Properly handle Aluminum Composite Panel Near Me deformation joints, settlement joints, and variable cross-sections to meet the requirements of use.
(4) Install the aluminum plate The installation and fixation of the aluminum plate should be firm and reliable, simple and easy.
1. The gap between the board and the Aluminium Composite Material Cladding board should be treated internally to make it flat and smooth.
2. After the Aluminium Plastic Panel plate is installed, cover and protect the parts that are easily contaminated with plastic film or other materials.
2.1 Material requirements:
2.1.1 Color-coated steel plate: The original Acm Sheets For Sale is mostly hot-rolled steel plate and galvanized steel plate. In order to improve the corrosion resistance and surface performance of steel plates, organic, inorganic or composite coatings must be applied. Among them, organic coated steel plates have developed rapidly. The commonly used organic coating is polyvinyl chloride. In addition, there are polyacrylate, ring Oxygen resin, alkyd resin, etc. The combination of coating and steel plate includes film lamination and paint coating. The main purpose of color coated steel plates can be used as roof panels and wall panels. The plastic composite steel plate produced by Shanghai Steel No. 3 Plant has a length of 1800mm, 2000mm, a width of 450mm, 500mm, 1000mm, and a thickness of 0.35~2.0mm. It has the properties of corrosion resistance, wear resistance and insulation. The peeling strength of plastic and steel plate is ≥20N/cm.