2.1.2 Aluminium Composite Panel Signage alloy plate: Acm Panel Price used for decoration engineering, with many varieties and specifications. From the surface treatment methods, there are anodizing treatment and spraying treatment. From the commonly used colors: silver, bronze, gold, etc. From the geometric dimensions: there are strip plates and square plates. The width of the strip plate is mostly 80-100mm, the thickness is mostly 0.5-1.5mm, and the length is about 6m. Square plates include squares, rectangles, and so on. The exterior wall panels used in high-rise buildings generally have a large area and require high rigidity and durability. Therefore, the Plastic Aluminium Composite Panel Price should be thicker, and even ribs should be added. In terms of decorative effect, there are aluminum alloy checkered plates, aluminum shallow checkered plates, aluminum and Seven Aluminium Composite Panel Harga corrugated plates, aluminum and aluminum alloy profiled plates, etc.
2.1.3 Frame material: Acp Panel Cost is made up of horizontal and vertical bars, and the main material is aluminum alloy profile or section steel. Because section steel is cheaper, strong, and easy to install, angle steel or channel steel is used in most projects. However, the skeleton should be pre-treated with anticorrosion, and black iron is strictly prohibited from entering the building.
2.1.4 The connecting parts of the fixed framework: mainly expansion bolts, iron backing Albond Aluminium Composite Panels, washers, nuts and connecting parts required for various designs and installations fixed to the framework. The quality must meet the requirements. 2.2 Main equipment:
2.2.1 Workbenches, cutting machines, forming machines, crimping tools, grinders, portable electric drills for connecting metal plates, concrete wall drilling electric drills, steel rulers (1m length), etc. required for cutting, processing, and assembling metal plates, etc. Long tape measure, box ruler, hammer, round (flat) steel chisels of various shapes, lead wire, powder thread package for elastic thread, ink fountain, small white thread, portable grinding wheel, pliers, iron level ruler, cotton thread, broom , Shovel, knife, ash trough, ash bucket, tool bag, gloves, red pencil, etc.
2.3 Operating conditions:
2.3.1 The concrete and wall plastering has been completed, and after drying, the moisture content shall not be higher than 8%; the wood products shall not be higher than 12%.
2.3.2 The pre-embedded parts reserved for water, electricity and equipment and the roof wall have been completed. Machines and tools for vertical transportation are prepared in advance.
2.3.3 The basic level of the decorative panel project should be checked in advance, and the hidden pre-inspection record should be made, and the installation process can be carried out after passing the test.
2.3.4 The outer shelf (high-rise multipurpose hanging basket or hanging shelf) should be erected and installed in advance. Multi-storey houses should use double-row shelves or bridges, and their horizontal and vertical rods and tie rods should be 150-200mm away from the wall and door window corners. The height and support of the shelf must comply with the construction Alpolic Aluminium Composite Panel requirements and safety operation regulations.
2.3.5 Technical measures, quality requirements, and protection of finished products should be emphasized when technical clarifications are made to construction personnel. A model room Panel Aluminium Composite should be built before large-scale construction, and only after the quality inspection department has passed the appraisal, the team construction can be organized.
Operation process:
3.1 Process flow: In principle, the wall is installed from bottom to top. Hanging straight, set square, find rules, spring line → fixed frame connecting piece → fixed frame → metal decorative panel installation → closing structure
3.2 Straightening, squaring, finding rules, and elastic lines: First, according to the requirements and geometric dimensions of the design drawings, the wall of the metal decorative panel should be hoisted, squared, finding rules, and once measured and elastic lines are determined. The Acp Sheet For Exterior size and quantity of the facing wall Aluminium Plastic Composite panels.
3.3 Fixing the connecting parts of the framework: the horizontal and vertical members of the framework are fixed to the structure through the connecting parts, and the connecting parts and the structure can be welded firmly with the embedded parts of the structure, or expansion bolts can be used on the wall. Because the latter method is more flexible, the size error is small, and it is easy to ensure the accuracy of the position, so it is more used in actual construction. Need to draw a line at the bolt position and follow the Acm Composite Panels line to make a hole